- Megaman PET - Overview :
- Schematic :
- Construction :
- Use :
- Chip Pic-o-matic :
- Chip Gen-o-matic :
- Battle Chip Gallery :
Megaman Pet - Schematic
;)
The plans for a "universal" chip. They're pretty simple.
Using a 10 position dip switch soldered to a chunk of PCB with the same number of traces as a real PET chip.
The Dip switches connect traces 1 - 9 to pin 10 when they're in the 'ON' position.
A better alternative to using both sides of the PCB would be to use a surface mount Dip switch.
;)
The pcb at 300 dpi.
I printed this out from the Gimp on an HP laserjet loaded with inkjet photo paper (see construction page)
Setting 'image print resolutuion' to 300 pixels/inch for both x and y gives a final print size of 5.43 x 1.667 inches (137.92 x 42.33 mm at 11.812 pixels/mm).
That will make the image match the size of the real chips.
